Industrial Enclosures for Thin Clients / Small Form Factor PCs

Industrial Features

  • Protects industrial and commercial thin clients and small PCs from harsh environments
  • Integrated cooling, power supply, and cable management
  • Sealed to NEMA 4/4X standards
  • Internal fan cools components without circulating outside air
  • Integrated industrial DC power supply (5/12, 5/24, or 19 VDC)
  • Drip gutters divert water around the perimeter of the enclosure door
  • Optional stainless or black powder-coated steel
  • 3-year warranty

Multiple Mounting Options

  • Mounts to the front or rear of our Pedestal Mounts
  • Wall Mount Bracket for direct attachment to a wall

Rear Mounted Enclosure on Fixed Pedestal

Product Description

Combined with Hope Industrial's Universal Mount Monitors, Industrial Keyboards, and Rugged Pedestal Mounts, the Thin Client/Small PC Enclosure creates a complete stand-alone workstation using any 3rd-party thin client or small form factor PC.

Each enclosure is constructed of either heavy-gauge brushed 304 stainless steel or black powder-coated carbon steel and is sealed to NEMA 4 or NEMA 4X specifications. This allows both commercial and industrial devices to be used in an industrial environment.

This enclosure has been designed for optimal heat management. Enclosure size and component placement, as well as an internal circulating fan, help distribute heat throughout the enclosure to maximize radiation through the sheet metal, keeping internal components cool.

Thanks to this internal directed airflow, some thin clients will actually run cooler inside this enclosure than on your desk in an air conditioned office! To determine whether your thin client or small form factor PC will work with this enclosure, visit our Thin Client Enclosure FAQs page.

Close-up of thin client enclosure showing internal components


  • Internal cooling fan controls temperature without circulating outside air
  • Cable routing trays for internal cable management
  • Integrated industrial DC power supply for thin client or small form factor PC - 5/12, 5/24, or 19 VDC available; power terminal blocks included
  • Drip gutters divert water around the perimeter of the enclosure door
  • Sealed to NEMA 4 or NEMA 4X standards for harsh, industrial environments, including full wash-down requirements
  • Designed for mounting on our Fixed or Yoke Mount Pedestals, or for direct attachment to a wall using an optional Stand-off Mounting Bracket
  • Keyless single-turn compression locks seal enclosure door to NEMA standards. Optional tubular key latches available.
  • Rugged construction using high-grade, heavy-gauge brushed 304 stainless steel or black powder-coated carbon steel
  • Internal service panel for installation of custom devices, such as barcode scanner receivers, USB hubs, or RFID receivers
  • Pre-drilled mounting holes include standard 75mm and 100mm VESA mounting patterns, as well as a variety of patterns for other common devices. See Thin Client Enclosure FAQs for more information.
  • Full 3-year warranty


  • Integrated Power Supply Output (power terminal blocks included)
    • ENCL-TC01 models - 22/40 W at 5/12 VDC (4.4/3.3 A)
    • ENCL-TC02 models - 22/40 W at 5/24 VDC (4.4/1.7 A)
    • ENCL-TC03 models - 40 W at 19 VDC (2.1 A)
  • Power Input - 90 to 264 VAC (100 to 240 VAC when connected to a Hope Industrial Systems monitor)
  • Storage Temperature - -20° to 50°C (4° to 122°F)
  • Operating Temperature - 0° to 50°C (32° to 122°F)
  • Weight - 20 lbs. (9.1 kg)
  • Dimensions (W x H x D) - 355.6 mm x 355.6 mm x 155.6 mm (14.0" x 14.0" x 6.125")
  • Maximum thin client dimensions (W x H x D) - 305 mm x 325 mm x 93 mm (12.0" x 12.8" x 3.7") total maximum clearance for thin client, cable connectors, and cable bend. Note: mounting brackets cannot extend past the maximum width and height dimensions. Allow 57 mm (2.25") typical for cable connector and cable. (Exception: when using CCSER-xx, allow 102 mm (4.0") for cable connector and cable.)
  • Certifications - UL 508A Listed (File No. E340976), WEEE