Industrial Monitor Screen Protectors

Price: $15


Features

  • Protects Hope Industrial touch screens from scratches and wear
  • Easy to install, remove, and replace
  • Anti-glare coating
  • Affordable protection for your touch screen investment
  • A must when sharp hand tools are in use near a touch screen
  • Not for use in wet environments or on glossy/shiny display surfaces
Industrial screen protectors for monitors and touch screens
Description

Product Description

For a small price you can protect your touch screen and keep it looking like new. These screen protectors are made of sturdy 7-mil polyester with the same acrylic hard coat that is used on the outer surface of our resistive touch screens. A 1/8" low tack adhesive is used around the back to secure it against the monitor and can be removed for cleaning or replacement.

You need to use Screen Protectors if...

  • You have metal dust that settles on the touch screen and acts like sandpaper when your operator touches it.
  • You have substances in your process that stick to the screen and are difficult to remove.
  • Your operators are using pens and other sharp tools that result in scratches, marks and even cracks.
  • You repeatedly touch the same area of the screen, which gradually wears down the acrylic hard coating.
  • Your operators use abrasive materials like paper towels or dirty shop rags to clean the display.

Note: these screen protectors are designed for use with Hope Industrial touch screens only. They may be used with other non-glossy/shiny resistive touch screens or other non-glossy display surfaces as long as the screen protector is not cut or resized (adhesive is only applied to the outside edges). Not designed for wet environments.

For use on:

  • Hope Industrial resistive touch screens in dry environments
  • Other non-shiny/glossy display surfaces in dry environments

Not for use on:

  • Non-projected capacitive touch screens or SAW touch screens
  • Any shiny/glossy display surfaces
  • Any displays in wet environments

Note that these screen protectors may not be cut or resized (adhesive is only applied to the outside edges).

Features and Specifications

  • 7-mil (.007") polyester
  • Anti-glare acrylic hard coat on front side
  • Low tack adhesive on back outside edge
  • Designed to be used in dry environments only
  • Resists dust from getting between the screen protector and the display
  • All sizes just $15 ($135 per 10-pack)
  • Sizes (W x H)
    • 12" - SP-12 - 246.4 mm x 184.9 mm (9.70" x 7.28")
    • 15" - SP-15 - 304.8 mm x 228.6 mm (12.0" x 9.0")
    • 17" - SP-17 - 339.1 mm x 271.3 mm (13.35" x 10.68")
    • 18" - SP-18 - 360.7 mm x 289.6 mm (14.2" x 11.4")
    • 19" - SP-19 - 379.0 mm x 303.5 mm (14.92" x 11.95")
    • 19.5" - SP-19.5 - 238.8 mm x 435.6 mm (9.40" x 17.15")
    • 20" - SP-20 - 407.2 mm x 305.6 mm (16.03" x 12.03")
    • 21" - SP-21 - 432.3 mm x 324.6 mm (17.02" x 12.78")
    • 22" - SP-22 - 472.4 mm x 294.6 mm (18.6" x 11.6")
    • 23" - SP-23 - 511.8 mm x 288.3 mm (20.15" x 11.35")