Heavy Industrial Monitor Pedestal Mounts

Base Price: $210


Industrial Stand-Alone Mount

  • Extremely sturdy industrial mount
  • Available in heavy gauge stainless or black powder-coated carbon steel

Yoke and Pedestal Features

  • Yoke adds full tilt and swivel range of motion
  • Adjustment knobs turn to lock display tilt
  • Cables route through rugged conduit and into pedestal; no exposed cables
  • Use with optional floor stand or bolt directly to the floor

Fixed Pedestal Features

  • Low cost alternative to Yoke and Pedestal options
  • All cables internally routed
Description

Description

These Heavy Industrial Monitor Pedestal Mounts allow our Universal Mount Monitors to be used anywhere on the factory floor, creating a full stand-alone workstation.

Two pedestal configurations are available: Yoke and Pedestal, or Fixed Pedestal. For applications requiring an adjustable display angle, our Yoke and Pedestal Mount allows full range of pan and tilt motion. Yoke and Pedestal Mounts are also available with free-standing floor stands (both wheeled and fixed).

When pan and tilt adjustability is not required, our Fixed Pedestal Mount provides a very clean, sturdy solution with all cables routed through the pedestal - no exposed wires or conduit.

Features and Specifications

Yoke and Pedestal Mount

  • Provides a complete, stand-alone industrial display station when used with one of our Universal Mount Monitors and sealed keyboard
  • Yoke Mount provides full range of tilt and swivel
  • KVM Extender can be mounted inside the pedestal
  • Pedestal made from extremely sturdy 40" tall, 4" square, 1/8" thick steel tube (1 m tall, 101.6 mm square, 3.175 mm thick)
  • 3/8" (10 mm) thick steel floor mounting bracket
  • Available in NEMA 12/4/4X stainless steel or NEMA 12/4 black powder-coated carbon steel
  • Available in both non-sealed and sealed configurations
    • Non-sealed configurations route cables from the display and through a rubber seal on the head of the pedestal and are available in NEMA 1 or NEMA 12 (when sealed with RTV or equivalent)
    • Sealed configurations use flexible conduit to route the cables from the display to the head of the pedestal and are available in NEMA 12/4 or 12/4/4X
  • Available in 3 different mounting styles:
    • Optional floor stand with locking casters: MOBL4X4-CSTR-xx series
    • Optional floor stand with leveling feet: MOBL4X4-FIXD-xx series
    • Direct attachment to floor
3/8" (10 mm) Base for direct attachment to floor
Optional Floor Stand with locking casters
Optional Floor Stand with leveling feet
3/8" (10 mm) Base for direct
attachment to floor
Optional Floor Stand
with locking casters
Optional Floor Stand
with leveling feet

Fixed Pedestal Mount

  • Cables safely routed through the base of the pedestal - no exposed wires or conduit!
    • Note: does not apply in Class II or III hazardous locations
  • Provides a complete, stand-alone industrial display station when used with one of our Universal Mount Monitors and sealed keyboard
  • Pedestal made from extremely sturdy 4" x 2", 3/16" thick steel tube (1.14 m tall, 101.6 mm x 50.8 mm, 4.8 mm thick)
  • KVM Extender can be mounted inside the pedestal
  • 3/8" (10 mm) thick steel floor mounting bracket
  • Available in NEMA 12/4/4X stainless steel or NEMA 12/4 black powder-coated carbon steel

HazLoc and NEMA/IP Rating Notes

  • For installations in Class II or III hazardous locations, cables may not be routed through the pedestal base.
  • When using the Yoke and Pedestal with floor stand options, note that powerful hose-directed water pointed at the pedestal base compromises the Type 12/4/4X seal of the monitor if cables are run through the pedestal. Consult Hope Industrial Systems if this is a potential issue.