Industrial Enclosures for Commercial / Industrial PCs


Industrial Features

  • Protects computers from harsh environments
  • Integrated cable management, mounting panels, and AC power distribution
  • Sealed to NEMA 4/4X for wash-down standards
  • Optional internal cooling kit cools components without circulating outside air
  • Drip gutter diverts water around enclosure door
  • Pre-drilled and tested for use with Dell Box PC 5000 embedded computers
  • Optional stainless or black powder-coated steel
  • 3-year warranty

Multiple Mounting Options

  • Mounts to the front or rear of our Pedestal Mounts
  • Optional Wall Mount Bracket

Product Description

Combined with Hope Industrial's Universal Mount Monitors, Industrial Keyboards, and Rugged Pedestal Mounts, the Commercial and Industrial PC Enclosure creates a complete stand-alone workstation using any 3rd-party desktop or industrial PC.

Each enclosure is constructed of either heavy-gauge brushed 304 stainless steel or black powder-coated carbon steel and is sealed to NEMA 4 or NEMA 4X specifications. This allows both commercial and industrial computers to be safely used in an industrial environment.

For a clean installation with any computer, removable internal mounting panels as well as AC power distribution and a full-height cable routing tray are standard.

Enclosure size and component placement help distribute heat throughout the enclosure to maximize radiation through the sheet metal, keeping internal components cool. When higher internal wattages are needed, an optional internal cooling kit improves overall heat handling and reduces internal hot-spots.

To determine whether your computer and equipment will work with this enclosure, visit our PC Enclosure FAQs page.

Enclosure with optional internal cooling kit
Enclosure with Dell Box PC 5000
PC Enclosure with Generic Fan Kit
PC Enclosure with Dell XE Fan Kit

Features

  • Cable routing trays for internal cable management
  • Integrated internal AC power distribution, power strip, and terminal blocks included
  • Drip gutters divert water around the perimeter of the enclosure door
  • Sealed to NEMA 4 or NEMA 4X standards for harsh, industrial environments, including full wash-down requirements
  • Designed for mounting on our Fixed or Yoke Mount Pedestals, or for direct attachment to a wall using an optional Stand-off Mounting Bracket
  • Keyless single-turn compression locks seal enclosure door to NEMA standards
  • Heat tested and pre-drilled to accommodate Dell Box PC 5000 Series industrial computers (use Dell 575-BBKC brackets)
  • Optional internal cooling kit for increased heat handling: MK-PC10-STD
  • Rugged construction using high-grade, heavy-gauge brushed 304 stainless steel or black powder-coated carbon steel
  • Internal service panel for installation of custom devices, such as barcode scanner receivers, USB hubs, or RFID receivers
  • Full 3-year warranty

Specifications

  • Integrated power strip; power terminal blocks included
  • Power Input - 90 to 264 VAC
  • Storage Temperature - -20° to 50°C (4° to 122°F)
  • Operating Temperature - 0° to 50°C (32° to 122°F)
  • Weight - 70 lbs. (31.75 kg)
  • Dimensions (W x H x D) - 533.4 mm x 939.8 mm x 179.6 mm (21.0" x 37.0" x 7.07")
  • Maximum PC dimensions (W x H x D) - 470 mm x 470 mm x 152 mm (18.5" x 18.5" x 6.0") total maximum clearance for computer, cable connectors, and cable bend. Note: mounting brackets cannot extend past the maximum width and height dimensions. Allow 57 mm (2.25") typical for cable connector and cable. (Exception: when using CCSER-xx, allow 102 mm (4.0") for cable connector and cable.)
  • Certifications - UL 508A Listed (File No. E340976), WEEE