Industrial Monitor KVM Extenders - 60 m

Base price: $695

Remote Keyboard, Touch Screen, and Mouse

  • Transparent extension of touch screen, keyboard/mouse, and USB devices up to 60 m (198') from the computer!
  • Allows placement of non-industrial computer out of the elements

Industrial Features


Product Description

The 60 m USB KVM Extender allows placement of an industrial monitor or touch screen, keyboard, mouse, or other devices up to 60 m (198') away from the computer or server using shielded CATx cables.

Using this system, an economical non-industrial computer can be placed in a secure, climate-controlled environment leaving only our rugged industrial touch screen or display exposed to tough factory conditions. Removing computers from the factory floor also increases reliability and eases future upgrades.

Separate USB and VGA local extenders connect directly to the PC, passing VGA and USB signals separately over shielded CAT5 cables to the remote extender unit, which is attached to the back of any Hope Industrial Universal Mount Monitor. When only VGA video signals are needed, extension of up to 150 m (500') is possible. USB signals may be extended up to 60 m (198').

Diagram of KVM extender system for 75 meters

This KVM Extender is designed to be used with Hope Industrial's Universal Mount displays. The extender is mounted in a modular NEMA 4/4X/12 enclosure which is attached to the rear of the display. All cables are routed through the KVM Extender and hidden from sight.


  • 3-year warranty
  • Supports video resolutions up to 1920 x 1080
  • Video sharpness correction for excellent video quality at any distance
  • Transparently extends full speed USB 1.1 devices (or USB 2.0 devices that will run in USB 1.1 mode)
  • Operating System independent (works with most computers that support USB and VGA protocols)
  • Fully powered from the computer's USB bus to eliminate external power supplies
  • Units can be assembled and tested with other components using our Workstation Assembly Service


  • Extension distance (using shielded Category 5 or higher UTP cable). Note: if distance between devices is less than
    15.2 m (50'), a KVM Extender may not be required. Please contact us for details.
    • 60 m (198') when extending USB and VGA.
    • 150 m (500') when extending VGA only.
  • Extenders should not be used to link between two different buildings that do not share a common earth ground. Linking between buildings can damage the KVM extender.
  • Supported VGA resolutions: up to 1920 x 1080
  • Supported USB protocols: full speed USB 1.1 devices (or USB 2.0 devices that will run in USB 1.1 mode)
  • USB remote connections
    • USB type B male: for touch screen interface
    • USB type A female: for keyboard or other USB device
  • Power Consumption
    • USB extension: 300 mA (plus that consumed by attached devices)
    • VGA extension: 500 mA
  • Operating Temperature - 0° to 50°C (32° to 122°F)
  • Humidity - 20% to 90% non-condensing
  • Certifications - CE, WEEE, UL 60950 3rd Edition / cUL Listed Product (File No. E212889), FCC Class A
  • DDC circuits enable the computer to query the monitor so that the video card can be optimally configured
  • Rated for Hazardous Locations (when used with Universal Mount Monitors) - I.T.E. for Class I, II, III, Division 2 for Groups A, B, C, D, F, G; Temp Code T5 or T4A (depending on the monitor used) (File No. E334953) per ANSI/ISA 12.12.01-2013